![]() I used gold pen, silver pen, marker, sharpie, and all failed to dry on the surface. ![]() Then I am struggling to find a pen that can draw on the gold metallic surface. I printed a copy of the reference shield (inner circle) on a piece of A4 paper and then stick it to the middle of the shield. I wanted to apply Bondo and continue with the sanding step, but because I am running out of time, I did some short cut. Then the fun part begin, I spray pain the shield using the gold spray paint to get the shiny effect. Then I apply the resin on top of the shield, this time I only use 100ml of resin because I only use the fibreglass on the inside and not on the outside. Once it dries, you will have a stronger shield. I used 200 ml of resin to cover the inside of the shield. Make sure you work in the outside or well ventilated area. ![]() Apply the first coat of resin evenly on the inside of the shield, then put the fibre glass cloth and dab the rest of resin to make sure there is no air bubbles and also all fibreglass cloth is covered with the resin. And it is very sticky so make sure you wear gloves and also smell quite strong.Ĭut the fibre glass cloth the size of the inner shield. ![]() To coat the epoxy resin, make sure you mix only a small amount (100ml) because the resin dried within 20 - 30 minutes. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |